Articles, Featured on homepage, News & articles

The importance of flow…

The importance of flow…

In life, it is all about flow and balance. When you are in flow, you loose track of time and you are feeling at optimum levels of productivity. This is also true for compressed air systems, when using a flow meter.

Recently, we participated in two very cool projects that involved flow-based compressor sequencers. Flow based? Yes, partially. Of course, pressure is still controlled in these systems, but as we all know, too many pressure fluctuations and too many start/stops due to wrong control of a large compressor may lead to stress and eventually to burnout.

Therefore the flow signal should use to solve the following puzzle in real-time: Which compressor combination suits the demand best? If you do this right, it will lead to less pressure fluctuations and the most energy-efficient control of your compressed air system.

Personal advice

Would you like to receive more personal advice on your compressed air system? We are happy to help!

Leave your contact details here if you want to receive tailored advice. One of our experts will get in touch with you.

  • By submitting your contact information by means of this form, you are indicating your formal acceptance of our Privacy Policy
  • This field is for validation purposes and should be left unchanged.
[Air Demand at desired pressure ] = [Compressor A]*100% + [Compressor B]*100% + [Compressor C] * X%,

where Compressors A and B are load/unload types (or centrifugal machines) and Compressor C is a variable type.

This way of controlling multiple compressors differs fundamentally from pressure-band / priority-based controllers. Especially in complex large systems with mixed compressor types, this traditional way of pressure-band control can become a recipe for disaster.

The system is often fine-tuned by a specialist, during a specific production week which is hopefully representative for the entire year. But as soon as this person leaves the factory and air demand changes, the initial optimum might not be so optimal anymore. Resulting in costly blow-off, or short cycling of machines. Which will result in a stressed-out energy manager, paying 30 to 50% higher energy bills than expected.

With flow-based compressor sequencing, the actual demand will be analyzed continuously and based on this demand, the master controller will decide which compressor combination fits the demand best. The master controller is pre-programmed with essential data:

  • Compressor types and capacity
  • Efficiency curves of the compressors
  • Number of allowed start/ stops (some types cannot be stopped frequently due to motor size or other type-specific restrictions)
  • Running hours, service interval

VPInstruments provides the full product portfolio with multi-parameter sensors that measure flow, pressure, temperature, and totalized flow.

All this data is fed into an “algorithm”, which seems to be a buzzword nowadays when talking about Industry 4.0, but is basically nothing more than a decision tree. A set of (smart) equations with some variables: Based on air demand, pressure, efficiency, running hours, start/ stops, etc, there will be one or more ideal combinations of compressors that match the equation. And when solved properly – even when demand profiles change over time- this will lead to the best possible efficiency level. On top of this, there is always redundancy, so in case of a problem with the master controller, compressors fall back into their local control, which is less efficient but at least provides a continuous flow of compressed air for production.

VPInstruments delivers high-quality multi-parameter sensors that measure flow, pressure, temperature, and totalized flow. Vital data forms the basis for these algorithms. Using this data to control your compressors can result in large energy savings. If you are interested to learn more, then respond to this article by liking or sharing. We will send you a white paper on this subject or put you into contact with one of our worldwide partners.

Get free presentation for you and your team on the benefits of permanent monitoring

Permanent monitoring of your compressed air and other utilities is key to maximizing energy savings. It comes with many benefits as the example above shows, including data-based investment decisions, alarms, increased awareness, and in some cases even an increase in production. Our team experts provide free-of-charge an online presentation to you and your team on the benefits of permanent monitoring. Interested? Make your appointment today!