Click to enlarge

VPFlowScope In-line 3/8″

The VPFlowScope In-line 3/8” is the perfect solution to measure low flows of compressed air and oxygen. Getting insight leads to optimization of your air/oxygen system, reduction of consumption and you can allocate costs.

Download brochure

Request a quote
Go to webshop
Description

The VPFlowScope In-line 3/8” measures flow, total flow, and temperature. Thanks to the patented Thermabridge™ technology, the VPFlowScope In-line can perform accurate flow measurements. The built-in display will show the actual and total flow, and the Modbus and analog 4 .. 20 mA outputs enable you to interface with VPVision or other monitoring systems.

Features/ Benefits

  • Measures flow, total flow, and temperature simultaneously
  • Patented Thermabridge™ technology for dry, clean gas measurements
  • For compressed air and/or oxygen
  • RS485 (Modbus RTU) + 4..20 mA output
  • 2-line TFT display with real-time information and configuration keys
  • Power and communication LEDs
  • Easy to install and compact size

Applications of VPFlowScope In-line 3/8″

  • Point of use in compressed air systems
  • Output of oxygen generators
  • Consumption measurement
  • Leakage measurement
  • Cost allocation and measuring your distribution network
Specifications

Specifications

PRELIMINARY

Flow range 2.15..50 l/min | 0.09..1.77 CFM
Accuracy 5% of full scale under calibration conditions
Temperature 20 .. 32 °C | 68 .. 89.6 °F
Reference conditions 20 °C, 1000 mbar | 68 °F, 14.50 psi
Gas types Oxygen, compressed air
Diameter 3/8″
Display type 1.8″ TFT for real-time flow and total flow readout
Outputs RS485 (Modbus RTU) | 4 … 20 mA
Electrical connection M8 5-pin female connector
LED status LED indicators for power and communication
Material Brass, polycarbonate
Pressure rating 0 … 10 bar gauge | 0 … 150 psi gauge
Power supply 14 … 24 VDC
Certification CE EN 60950-1, EN 61326-1, EN 61000-3-2, EN 61000-3-3, EN 61326-1
Mounting connection Mount between pipe ends using Hylok SICMC-6-6G
Documentation

Documentation

You may also like…

VP Dew Point Sensor for air and gas systems
VPInstruments VP Dew Point Sensor Transmitter
Compare

VP Dew Point Sensor

Encountering humidity in your pipes is acceptable to a certain level, but you don't want to exceed the acceptable limits. In order to stay in control of your humidity by managing your temperature and pressure levels you need dew point transmitters. The VP Dew Point Sensor is the smart dew point transmitter with a large measurement range of -70..+60 ⁰C, so you can measure downstream a refrigerant type dryers as well as a desiccant-type dryer. The sensor has multiple outputs, alarm LED, and built-in autocalibration. Download brochure
Request a quote
Go to webshop
VPFlowScope In-line flow meter, 0.5", 1"and 2 inch model available
VPFlowScope Inline measures bi-directional flow, pressure and temperature simultaneously
Compare

VPFlowScope In-line flow meter

With the VPFlowScope® In-line you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to 2". Download brochure
Request a quote
Go to webshop
VPVision energy monitoring system
VPVision energy system visible via VPN network
Compare

VPVision

VPVision is the complete monitoring solution for compressed air, technical gases and energy management. Get a grip on your usage and see the patterns of compressed air between your supply and demand side.
Download brochure
Request a quote