3 Phase Power Meter
The VPInstruments 3 Phase Power Meter is the highly accurate power meter for your permanent power measurements. With the power meter you can measure the voltage and current of all three phases. It provides power, voltage, current, cos(phi) and many more electrical parameters via the RS485 (Modbus RTU) interface.
Download brochure 
Dew Point Sensor – extreme dry air
Encountering humidity in your pipes is acceptable to a certain level, but you don’t want to exceed the acceptable limits. In order to stay in control of your humidity by managing your temperature and pressure levels you need dew point transmitters. VPInstruments’ dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible.
Hot tap drill
The hot tap drill is the universal tool to install your insertion flow meter in any compressed air system. In only 30 minutes you can drill a hole and install your flow meter. Using a hot tap saddle and a hot tap drill, you can create a new installation point without depressurizing your installation.
Download brochure
VP Dew Point Sensor
Encountering humidity in your pipes is acceptable to a certain level, but you don't want to exceed the acceptable limits. In order to stay in control of your humidity by managing your temperature and pressure levels you need dew point transmitters.
The VP Dew Point Sensor is the smart dew point transmitter with a large measurement range of -70..+60 ⁰C, so you can measure downstream a refrigerant type dryers as well as a desiccant-type dryer. The sensor has multiple outputs, alarm LED, and built-in autocalibration.
Download brochure
VPFlowScope DP flow meter
The patented VPFlowScope® DP is the ultimate measurement tool for saturated compressed air flow measurements. The unique design enables you to take measurements in the discharge pipe of a compressor under 100% saturated conditions. You can combine the probe with two display module types or with a connector cap without display.
Download brochure
VPFlowScope In-line 3/8″
The VPFlowScope In-line 3/8” is the perfect solution to measure low flows of compressed air and oxygen. Getting insight leads to optimization of your air/oxygen system, reduction of consumption and you can allocate costs.
Download brochure
VPFlowScope In-line flow meter
With the VPFlowScope® In-line you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to 2".
Download brochure
VPFlowScope M flow meter
The VPFlowScope® M is a four-in-one insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures flow, pressure, temperature, and total flow simultaneously. With the introduction of the VPFlowScope M, recalibration becomes history.
Unlike traditional flow meters, the VPFlowScope M does not require traditional recalibration, where you have to ship the unit back. Instead, the VPFlowScope M consists of a transmitter and the patented VPSensorCartridge® which reduces recalibration to a simple exchange.
Download brochure
VPFlowScope M Start Kit
The VPFlowScope M is a 4-in-1 insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures bi-directional flow, pressure, temperature, totalized flow simultaneously.
The VPFlowScope M is the next step in gas measurement. You are industry 4.0 ready, with the additional Ethernet output. With the VPFlowScope M re-calibration is history: simply exchange the patented VPSensorCartridge!
The VPFlowScope M start kit offers all you need to start measuring today, including the Transmitter with built-in data logger, cables, and software. Start measuring today with the plug and play start kit!
VPFlowScope Probe flow meter
The VPFlowScope® Probe is the number one measurement tool for compressed air audits and fixed installations. You can combine the probe with two display module types or a connector cap without display. With the VPFlowScope Probe you can measure virtually any compressed air system using a single instrument .
Download brochure
VPFlowTerminal
The VPFlowTerminal is a plug & play wall mount display with built-in power supply and two million point data logger.
Download brochure
VPLog-i /-R
The easiest power meter in the world. The VPLog-i is a Rogowski type coil that measures AC currents (true-RMS on a single-phase power cable). Just open the sensor and wrap around the power cable you want to measure. The LED provides feedback.
Download brochure
